DeatschWerks DW65a Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DeatschWerks DW65a. DeatschWerks DW65a 7 pages. 97-06 commodore fuel pump

Imprimer la page

DeatschWerks

97-06 Commodore DW65a Fuel Pump Installation Guide

GenIII Commodore DW65a Fuel Pump Install

PLEASE READ – this guide is intended to aid in the installation of our products. It is recommended that

factory manuals or instructions are followed to remove the fuel pump assembly from the vehicle. Some

instructions in this guide are generic. The factory manual should supersede any contradiction.

This kit uses PTFE tubing and permanent clamps. Heat from a heat gun, high temperature hair dryer, or

boiling water may be used to soften the tubing ends to make installation onto the pump and assembly

easier. DO NOT USE AN OPEN FLAME! The permanent clamps may be crimped with end cutters or side

cutters. PTFE tubing installation video:

https://www.youtube.com/watch?v=6NE6tRE1Kug

Below is a picture of suggested tools that will make the installation process easier.