Majacraft Aura Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Majacraft Aura. Majacraft Aura 16 pages.

Position the Base assembly on the flat surface. Now slide the Stem/Handle assembly into the Base assembly

and carefully align the stem holes with the base side plate holes and the brace hole with the hole underneath

the base assembly.

Once the Stem/Handle assembly is in place, it is good to tilt the handle over onto the stop. The handle can

fold in both directions but should only fold to the rest position to the LEFT when you are sitting in front of the

wheel. The handle stop has a bumper that protects the stem from being dented when folding however there is

no bumper when folding to the right.

BUMPER

3. Fit the Pedals to the Base

Required:

12 - Silver 25mm (1") screws (in the hardware bag)

Posidrive screwdriver

Insert the JCB bolts through the holes and into

the stem assembly. Turn the base over and

insert the JCB bolt in the hole underneath.

Partially tighten the bolts, checking that they are

threaded in correctly before finally tightening all

bolts.

majacraft