GamerModz xbox One - JUGGERNAUT VER 4.0 Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} GamerModz xbox One - JUGGERNAUT VER 4.0. GamerModz xbox One - JUGGERNAUT VER 4.0 10 pages.

Imprimer la page

To disable the Pro Buttons, Left Thumbstick

LED will flash one time to indicate that the Pro Buttons have been off.

Hold

, then

Programming a Preset for Button Remapping

To program a Pre-Set, first cycle to the Preset you wish to program (Refer to Instructions Above). Once you are

in the Preset you want to Program, hold the Left Thumbstick

begins to flash indicating you are in programming mode.

Once you are in programming mode, simply hold the button you want to remap, tap the Pro Button

would like to remap it to, then release. The Main LED will flash once letting you know that the remap was

successful. Repeat this step to assign another button to the other Pro Button.

Once you have finished assigning remaps to the Pro Buttons, hold the Left Thumbstick

to save the Preset. The Main LED will flash 5 times, letting you know that you have successfully saved the

Preset.

You can then repeat the above steps to Program all of your presets. Note that your presets will be saved even

after you turn your controller off.

The GamerModz LED Pro Buttons allows you to remap the following buttons/actions:

S, O, T, X, L1, R1, L2, R2, L3, R3, D-Pad Up, D-Pad Down, D-pad Left, D-Pad Right

NOTE: Guide Button, Menu Button and View Button Cannot be Remapped

GamerModz

Disabling Pro Buttons

and Tap Left on the D-Pad 6 Times

TAP

, 6 Times

****** Important! Read Below! ******

PS4 – SPS-X3 Ver 4.0

. The PS4 Controller

Release

and Left on D-Pad

until the Main LED

you

and Left on D-Pad