Majella audio VVCA Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Majella audio VVCA. Majella audio VVCA 4 pages. Fully analog dual voltage controlled amplifier

Imprimer la page

INTRODUCTION

The VVCA is a fully analog dual voltage

controlled amplifier (VCA). The unique part

of this VCA is the velocity input, which

makes

possible

incoming CV signal with a velocity voltage

(or any other CV source). The VVCA is a

linear dual VCA and can be used for both

CV and audio signals. It is a straightforward

4HP module that adds velocity, and a whole

new dimension to your modular setup!

FUNCTIONAL DIAGRAM

CONTENT

In the box of the assembled version of the

VVCA contains the. following

Tested and Assembled VVCa Module

•

16pin to 16 pin ribbon cable

•

Mounting hardware: two M3 screws

•

If anything of the above is missing. Please

contact your dealer or support@majella-

audio.com

SPECIFICATIONS

Dimensions: 128.5 x 20 x 2mm

•

modulate

the

VELOCITY CONTROLLED VCA (VVCA)

Doepfer A-100 Eurorack compatible

•

(16 pin power connector, uses the 5V

rail!)

Power consumption: +/-12V (15mA),

•

,5V (10mA)

POWER CONNECTION

This module is designed to be connected to

your

Eurorack

ribboncable. The -12V (red stripe) should be

directed as shown in the picture below.

WARNING!

This module is designed for Eurorack

systems. The supply should be +-12V and

connected signals should not be out of the

+-12V range! Do not reverse polarity when

connecting the power, this will damage

your module permanently!

User Manual

system,

using

16-pin