Adexa CIC2000 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Adexa CIC2000. Adexa CIC2000 10 pages.

E01

E02

E03

6.Cleanliness and maintenance

※Before cleaning, please unplug to avoid electric shock!

※Just remove the pot and wipe the surface. If the ceramic surface become's yellow use

oxalic acid or tooth paste to clean it.

※Do not place anything inflammable, acid or alkali near the cooker to avoid corrosion

and short longevity.

※Do not immerse the cooker in water and do not use gasoline or benzene etc detergent

to clean. You should use soft damp cloth to wipe it.

※Please do not rub the surface by the bottom of pots to avoid damage of the plate.

※Thoroughly clean the cooker before storing, cover it with plastic bag and keep it in dry

place.

7.Note

※Use the cooker in correct temperature and humidity.

※Do not touch the surface after using as it can be still hot.

※Please use pots and containers with smooth bottom, if not, the temperature will not be

high enough and lead to out of order. Do not use those pots made up of aluminum,

copper or nonmetal.

※With the sluggish conduction of heat, empty pots and containers will be destroyed or

deformed even if the cooker has protecting function to deal with this situation. So please

do not heat empty pots and containers.

※To get the best efficiency, please use the recommended pots else it may cause out of

order or poor efficiency.

※It is normal that there will be difference for each cooker for the sluggish temperature

checking and different boiling point in different areas.

※If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified person in order to avoid a hazard.

※This cooker does not heat small objects put on the heating surface. But you had better

not put metal, forks, knives, spoons or watches on it, which will be damaged after the

cooker starts to work.

※Try not to collide the ceramic plate. If broken, please cut off the power immediately

The temperature of IGBT is over high or the IGBT is

open/short circuit.

The temperature under glass is over than 180℃,or

the temperature sensor is in open/short circuit.

The supply voltage over or lower than normal.