CentralPneumatic CentralPneumatic Manuel du propriétaire - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} CentralPneumatic CentralPneumatic. CentralPneumatic CentralPneumatic 20 pages. 18 gauge 2-in-1 air nailer/stapler
Imprimer la page
clearing Jams
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION,
BEFORE ANy MAINTENANcE OR REpAIRS ARE DONE (including clearing jams):
• Wear ANSI-approved safety goggles with side shields.
Other people in the work area must also wear ANSI-approved impact safety goggles with side shields.
• Release the trigger.
• Detach the air supply.
• Attempt to fire the Tool into a piece of scrap wood to ensure that it
is disconnected and is incapable of firing any fasteners.
• Empty the magazine and leave it open during service.
The Magazine is spring-loaded and may cause parts or a fastener to fly out of the Tool.
1. If a fastener is jammed in the
discharge area, remove it with pliers.
2. If a fastener is jammed in the Magazine, depress
the Latch (64) and pull back on the Moveable
Magazine (55), and remove the Position Seat
(54). Then pull out of Fixed Magazine (52).
3. Pull out the jammed fastener and the remainder
of the fastener strip that is still in the magazine.
Dispose of the remaining fastener strip; it may
be bent or damaged in some other way.
4. If a fastener is jammed in the Drive Guide (40),
pull out the Quick Release Lever (44) and
disengage the Quick Release Spring (45).
5. Remove the jammed fastener; pliers maybe
necessary to remove a stuck fastener.
6. Inspect the Drive Guide for any bends or
breakage. If it is damaged, do not use the tool
until it is repaired by a qualified technician.
Item 68019
For technical questions, please call 1-800-444-3353.
7. Lightly oil the Drive Guide, engage the
Quick Release Spring, and snap the
Quick Release Lever back into place.
8. Make sure that the Safety Tip moves
smoothly without binding.
9. Reload the Nailer/Stapler and then
reconnect it to the air supply.
10. Press the Safety of the Nailer/Stapler against
an appropriate piece of scrap wood.
11. Test fire the Nailer/Stapler several times,
checking for proper operation.
12. Disconnect the Nailer/Stapler, remove the fasteners,
and store in a location out of children's reach.
13. If the jam cannot be cleared using
the method above, have the tool
serviced by a qualified technician.
Page 15