CentralPneumatic 61718 Manuel du propriétaire - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} CentralPneumatic 61718. CentralPneumatic 61718 16 pages. 1/2" air

Imprimer la page

General Operating Instructions

1. If an automatic oiler is not used, add a few
drops of Pneumatic Tool Oil to the airline
connection before use. Add a few drops
more after each hour of continual use.
2. Connect the air hose to the air inlet of the tool.
3. If tightening the nut, tighten by hand
as much as possible first.
4. Place the socket over the nut.
5. Grip the Impact Wrench firmly with two
hands and squeeze the Trigger.
Item 61718
For tech nical q uestions, please call 1 -8 8 8 -8 6 6 -5 7 9 7 .
6. If the tool requires more force to accomplish
the task, verify that the tool receives sufficient,
unobstructed airflow (CFM) and increase the
pressure (PSI) output of the regulator up to the
maximum air pressure rating of this tool.
CAU TION! TO P R EV ENT INJU R Y FR OM
TOOL OR ACCESSOR Y FAILU R E:
Do not ex ceed th e tool' s
m ax im um
air pressure rating .
If the tool still does not have sufficient force
at maximum pressure and sufficient airflow,
then a larger tool may be required.
7. The amount of actual torque may vary depending
on the cleanness and condition of the threads and
other factors. If tightening critical components,
check the actual torque applied to the fastener
with a mechanical torque wrench (not supplied).
8. To prevent accidents, turn off the tool, detach
the air supply, safely discharge any residual air
pressure in the tool, and release the throttle and/
or turn the switch to its off position after use.
Clean external surfaces of the tool with clean,
dry cloth, and apply a thin coat of tool oil.
Then store the tool indoors out of children's reach.
Page 11