Majestic FSUV30 Instructions d'installation et d'utilisation par le propriétaire - Page 11

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'utilisation par le propriétaire pour {nom_de_la_catégorie} Majestic FSUV30. Majestic FSUV30 16 pages.

Imprimer la page

Keep the control compartment, logs and burner area

surrounding the logs clean by vacuuming or brushing at

least twice a year. THE LOGS CAN GET VERY HOT

— HANDLE ONLY WHEN COOL.

Always turn off gas to the pilot before cleaning. For

relighting, refer to lighting and operating instruction.

WARNING: Failure to keep the primary

air opening(s) of the burner(s) clean may

result sooting and property damage.

Pilot Control System

The burner and control system consists of:

• main burner

• gas oriﬁce

Most of these components may require only an occa-

sional checkup and cleaning and some may require ad-

justment. If repair is necessary, it should be performed

by a qualiﬁed technician.

In order to properly clean the burner and pilot assembly,

f i r e - p a r t s . c o m

turn off the gas to the unit, remove the window frame

panel and logs exposing the burner and pilot assembly.

Clean all foreign materials from the top of the burner.

Check to make sure that burner parts are clean. Visu-

ally inspect pilot. Brush or blow away any dust or lint

accumulation If pilot oriﬁce is plugged, disassembly

may be required to remove any foreign material from

the oriﬁce or tubing.

10001784

Maintenance

• pilot burner

• thermostatic control

FSUV20/30 Vent Free Gas Heater

To obtain proper operation, it is imperative that the pilot

and burner's ﬂame characteristics are steady, not lifting

or ﬂoating.

The air shutter is set at factory no adjustment should be

necessary.

It is important to periodically perform a

visual check of the pilot and the burner

ﬂames. (Page 9, Figs. 9 & 10)