DEC 525-MB Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DEC 525-MB. DEC 525-MB 10 pages. Ide

Kit Contents

The 525-MB hard disk drive kit contains the following:

Item

One disk drive

Two expansion brackets

Four screws, #6-32 x 3/16-inch

Four screws, #6-32 x 1/4-inch

DECpc 525-MB IDE Hard Disk

Drive Installation Guide

If you install the drive in a DECpc 400 ST, you need an IDE cable. The cable is not

included with this kit and must be ordered separately. The Digital part number is

BC10N-3E.

Read the following installation instructions. If you are unsure about your ability to

install the drive, you can contact Digital Services to hire a Digital Services technician

to install the drive for you.

If you are replacing a drive, or adding a second drive, always back up the data before

starting the installation.

The drive can be connected directly to the 40-pin IDE-bus connector located on the

DECpc motherboard, or to a separate IDE-bus adapter board.

______________________CAUTION ________________________

Static electricity can destroy the circuits on the drive's circuit

board. Discharge static electricity by touching the drive's metal

frame before touching the circuit board.

Order Number

RE25L

74-44337-01

90-08020-01

90-00038-19

EK-XARCG-IA-A01

Installation Guide