Adexa CP-12S Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Adexa CP-12S. Adexa CP-12S 14 pages. Electric conveyor pizza oven

Imprimer la page

application of the device must be followed and complied with. The device should be never

left unattended during operation. Special attention should be paid to when the unit is in use,

if the children are near the appliance. This manual is considered to be a permanent part of the

appliance. Preserve this manual safely for the reference of operators. When passing

on/selling the device to a third party, the manual must be handed over along with the device.

Every person using the unit must act in accordance to the manuals and under consideration

of the safety advice. Never use the unit outdoors.

2.3 Intended use

CAUTION! Any use other than intended purpose is forbidden and is not considered as

conventional.

3. Packaging and storage

3.1Packaging

Please do not throw away the packing materials as they might be useful for storage purposes,

when moving or, in case of damages, when the unit must be sent back for repair. The outer

and inner packing material should be removed completely from the device before installation.

NOTE! Some of the packing materials are re-usable.

3.2 Storage

Do not open the packages until installation. Pay attention to the markings on the carton

surface. Do as the markings indicate. Do not put the whole appliance with the carton upside

down. Care should be taken when moving the appliance. Do not store outdoors. Keep it dry

and dust-free and had better be put in a well-ventilated area. Do not expose it to aggressive

media. Do not expose it to direct sunlight. Avoid mechanical shocks and vibration. In case of

longer storage (> 3 months), make sure you check the state of the packaging regularly.

4. Technical data

Model

Working Voltage

Power Input

Qty of Heating Elements

Motor

Speed Control

Belt Dimension

Measurements (mm)

Production Ratio

CP-12S

220-240V

6.7KW

60W

4-75

1020 X 355 (Depth)

1120X575X480

16 pizza / hr.(300-mm-diamtered)

CP-18S

380-415V

10.3KW

60W

4-75

1460X505(Depth)

1560X810X1130

20 pizza / hr.(300-mm-diamtered)