Bristan Blitz BTZ BAS C Instructions d'installation et manuel de l'utilisateur - Page 14
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel de l'utilisateur pour {nom_de_la_catégorie} Bristan Blitz BTZ BAS C. Bristan Blitz BTZ BAS C 20 pages.
![Bristan Blitz BTZ BAS C Instructions d'installation et manuel de l'utilisateur](/uploads/products/server2/2038459/2038459.jpg)
Maintenance
General Cleaning
Your fitting has a high quality finish and
should be treated with care to preserve
the visible surfaces. All finishes will
wear if not cleaned correctly. The only
safe way to clean your product is to wipe
with a soft damp cloth. Stains can be
removed using washing up liquid. All
bathroom cleaning products (powders
and liquids) will damage the surface of
your fitting, even the non-scratch
cleaners.
Note: Never use abrasive detergents or
disinfectants or those containing
alcohol, hydrochloric acid or phosphoric
acid.
Bristan recommend E-
cloth for cleaning all of
our bathroom & kitchen
products. Using just
water, E-cloth gives a
smear free, deep clean by breaking up
and holding dirt, which normal cloths
leave behind. Order through your Bristan
stockist (order code: ECLOTH).
Cleaning the Showerhead – BTZ BSM C
Your Bristan showerhead has rub-clean
nozzles for easy cleaning. Simply rub
your fingers across the rubber spray jets
regularly and before you turn the shower
on to remove any scale or debris.
The hardness of the water in your area
will determine how often you should
clean your showerhead. Build up of scale
in particularly hard water areas
combined with constant use means you
may need to clean your showerhead once
a week. To ensure continued
performance the showerhead needs to be
regularly descaled.
14
See map of Hard Water Regions in the UK on
page 16 to see the water type in your area.
Tip: If the showerhead is heavily scaled or
has not be maintained for a long period of
time a solution of hot water and white vinegar
may be needed to clear the scale.
Mix a 50/50 solution and rub the nozzles
thoroughly with the solution making sure the
solution gets into all of the nozzles.
Wash off the solution with clean water.