Decagon ECH2O Check Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Decagon ECH2O Check. Decagon ECH2O Check 2 pages.

Imprimer la page
Decagon ECH2O Check Manuel de démarrage rapide
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
10688-06
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
10688-06
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
10688-06
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
10688-06
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
10688-05
To make a measurement:
Press the left (I) button
*Note: If probe is measured in air
while in "IPF" or "PCT" mode, a
negative value will be displayed.
To adjust calibration, refer to the
operations guide.
To replace the battery, unscrew the
back of case. Battery size: CR2
The ECH
O Check will shut off
2
automatically when not in use for
more than 5 minutes.
© 2009 Decagon Devices, Inc.
10688-06
10688-06
10688-05
10688-06