Bristan EXD TBAS C Manuel d'instructions d'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Bristan EXD TBAS C. Bristan EXD TBAS C 16 pages.
Imprimer la page
Installation Cont.
Bath Shower Mixer
1. Remove the metal and rubber washers
from body/ handset holder threaded tails.
2. Fit the body to the bath ensuring that
the washer is fitted between the body and
the bath.
3. Secure the body to the bath using the
washer and metal backnut below the bath.
Tighten the backnut onto the threaded
tail. A suitable spanner may be required to
fully tighten the backnut.
4. Screw the flexi tails into the bottom of
mixer body and tighten by hand only
(DO NOT OVERTIGHTEN)
5. Connect the flexi tails to the hot and
cold water supplies.
6. Fit the handset holder base ensuring
the washer is fitted between the base and
the bath.
7. Secure the handset holder base to the
bath using the washer and metal backnut
below the bath. Tighten the backnut onto
the threaded tail.
A suitable spanner may be required to
fully tighten the backnut.
8. Feed the hose through the handset
holder base and connect the hose to the
shower outlet pipe using the small sealing
washer.
9. Fit the handset to the hose using the
small washer.
10. Turn on both water supplies, operate
handle in both directions, letting the water
flow for a few minutes to flush through
the system.
11. Check all joints and connections for
leaks.
10
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.