Bristan IRBS4-BN Instructions d'installation et manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel d'utilisation pour {nom_de_la_catégorie} Bristan IRBS4-BN. Bristan IRBS4-BN 16 pages. Infrared temperature control automatic basin spout
Également pour Bristan IRBS4-BN : Instructions d'installation et manuel d'utilisation (20 pages)
Imprimer la page
Specification
Operating Pressure Range:
Min. 1.0 Bar - Max. 5.0 Bar
Maximum Static Pressure: 10 Bar
Inlet Water Supply Temperature Range:
5°C - 45°C
Power Supply: AC: 220V-240V; 50/60HZ
DC: 6V
(4 x AA alkaline batteries - Not Supplied)
Power Consumption:
Sensing Range: 30-32cm
Self-close Override Time: 30 seconds ±5
seconds
Recommended Usage
Domestic
Light
Commercial
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
4
<
Static
0.3MW
<
Active:
3W
Heavy
Commercial
Health Care
This product has been tested to meet the
requirements of the Water Regulations
Advisory Scheme (WRAS) and satisfies
the requirements of the Water Supply
(Water Fittings) Regulations 1999 and
current byelaws.
BS 6700 recommends the temperature of
stored water should never exceed 65°C.
A stored water temperature of 60°C is
considered sufficient to meet all normal
requirements and will minimise the build
up of limescale in hard water areas.
This product should be installed in
compliance with the current Water
Regulations.
If in doubt, contact a registered plumber
or your Local Water Authority or the
Secretary of The Institute of Plumbing,
address as follows;-
The Institute of Plumbing,
64 Station Lane,
Hornchurch,
Essex, RM12 6NB
Tel:01708 472791