Bristan K SNKSL EF C Manuel d'instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Bristan K SNKSL EF C. Bristan K SNKSL EF C 16 pages. Colonial single lever easyfit sink mixer

Imprimer la page

General Information

This product has been tested to the Water Regulations Advisory Scheme (WRAS) and

satisfies the requirements of the Water Supply (Water Fittings) Regulations 1999 and

current bylaws. For full Installation Requirements & Notes (IRN) please visit

www.wras.co.uk/directory.

Designed to comply with BS EN 200 for combination taps to be used within systems

designed to BS 8558.

BS 8558 recommends hot water should should be stored and distributed at a

temperature of not less than 60°C which will minimise the build up of limescale in hard

water areas.

If the fitting is installed at low pressure (tank fed), then the minimum distance from the

highest installed position of the outlet to the underside of the cold tank should be at

least 2 metres to ensure adequate performance.

This tap should be installed in compliance with the Water Regulations. Where the

supplies are unbalanced, i.e. Hot water from cylinder tank / cold from the mains,

approved check valves must be fitted in the supply pipes.

For further details contact your Local Water Authority.

Specifications

Operating pressure range (bar)

Maximum static pressure – 10.0 bar

Inlet Connections: M10 1/2" BSP Flexible Tails with Isolation Valves

System Requirements:

Gravity fed hot & cold (Equal pressures)

Gravity fed hot & cold (Differential pressure, maximum ratio 5:1)

Unvented systems

Instantaneous water heater (Combination boiler)

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Min

0.2

Max

5.0