Bristan Moloko Instructions de montage et liste de contenu - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions de montage et liste de contenu pour {nom_de_la_catégorie} Bristan Moloko. Bristan Moloko 12 pages. Thermostatic surface mounted bar shower valve with fast fit connections

Imprimer la page
Your Bristan dual control shower fitting is a thermostatic mixer incorporating a wax
capsule thermostat to ensure constant showering temperatures.
This valve has been designed to comply with BS EN 1287:1999 & BS EN1111:1999.
Manufactured to the highest quality standards.
These instructions are for your guidance to a safe and successful installation and should
be left with the user.
All products manufactured and supplied by Bristan are safe provided they are installed,
used correctly and receive regular maintenance in accordance with these instructions.
Inlet Connections:
Water Pressures:
Maximum Outlet Temp: Factory Set to 38°C at the safety click and 48°C at the final stop
(can be re-set to suit site conditions).
Hot & Cold Supply Temperature
Maximum Cold supply:
Minimum recommended hot supply:
Maximum Hot Supply:
Note: the inlet hot water temperature must be at least 10°C above the required blend
temperature.
3. Pack Contents Check List
1 x Shower Valve
4 x Screws
4 x Wall Plugs
2 x Wall Pate
2 x 15mm Olives
2 x Fixing Bridge
2 x Shroud
2 x Filter Washer
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk

1. Introduction

2. Specification

15mm compression with 150mm between centres.
Min. 0.3 bar Max. 5 bar Maximum recommended imbalance
between hot and cold supply should not exceed a ratio of 5:1
25°C
60°C
80°C

4. Installation

2