AIRFLO AFV20 Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} AIRFLO AFV20. AIRFLO AFV20 7 pages. Wet & dry vacuum cleaner

(2) Operation

1. Insert the plug into the supply socket.

2. Press switch button. The machine will start to work.

3. You can adjust the airflow by pushing the sliding block up and down

Protective device

(1) When the tank is full of water, this Protective Device will rise up. Suction power

will stop but an abnormal noise may indicate that the motor is running at a high

speed. If this happens, cut off the power immediately and pour out the water

from the tank. The machine will begin to work normally afterwards.

(2) When the machine overturns or shakes excessively, the Protective Device may

not work correctly. What you should do is to switch off the machine and turn it

upright before continuing to use the vacuum.

(3) When the tank is full of water, the Protective Device will rise up, suction power

will cut off. Pour out all the water from the tank before resuming operation.

(1) Barrel Cleaning

* After working or when the barrel is full of dust which causes suction to decrease

considerably, you should cut off the electricity and clean the dust away from the

barrel.

1) Unfasten the locking knob, lift up the top cover.

2) Take off the filter bag, throw out the dust / dirt from the dust barrel.

3) Install the filter bag back and place the top cover.