Bristan Pear Instructions d'installation et manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel de l'utilisateur pour {nom_de_la_catégorie} Bristan Pear. Bristan Pear 12 pages. Monobloc sink mixer with pull out spray

Imprimer la page

Installation.

1. Identify all components are present prior to starting installation using the diagram
overleaf.
1.
Handle
2.
Grub Screw Cap
3.
Grub Screw
4.
Shroud
5.
Cartridge Retaining Nut
6.
Cartridge
7.
Internal Housing
8.
Seal
9.
Mixer Body
10.
Rubber Washer
11.
Plinth
12.
O-Ring
2. The pull-out handset (22) with an integral non-return valve (21) is pre-fitted to pull-out hose
(17) and mixer body (9).
3. Screw the fixing rod (16) into base of mixer tap.
4. Attach the fixing nut (17) and connection piece (18) to the fixing rod (16) and connect the
short pull out hose connector (24) as tight as possible by hand only (DO NOT
OVERTIGHTEN)
5. Carefully screw both inlet flexible connecting pipes (18) into the two outer holes on the
underside of the mixer body (9) as tight as possible by hand only (DO NOT OVERTIGHTEN).
Please note: It may be necessary (depending on size of hole in sink/work surface) to only fit
one flexible connecting pipe to the mixer prior to fitting the mixer in order to feed all flexible
connecting pipes and fixings through the hole and then fit the second flexible connecting pipe
from underneath after fitting the mixer.
6. Fit the mixer body (9), rubber washer (190), plinth (11) and O-ring (12) to the top of the
sink/work surface and fit the re-enforcing plate (13), C-shaped rubber washer (14) and C-
shaped metal washer (15) to the fixing rod (16), under the sink/work surface. Fully tighten
all connections, making sure mixer is securely fastened in place with operating handle
pointing in the desired position.
06
x1
13.
Re-Enforcing Plate
x1
14.
Rubber 'C' Shaped Washer
x1
15.
Metal 'C' Shaped Washer
x1
16.
Fixing Rod
x1
17.
Fixing Nut
x1
18.
Connection Piece
x1
19.
Pull Out Hose Weight
x1
20.
Handset Connection
x1
21.
Non Return Valve
x1
22
Handset
x1
23.
Flexi Tails
x1
24.
Pull Out Hose Connector
25.
Pull Out Hose
x1
x1
x2
x1
x1
x1
x1
x1
x1
x1
x2
x1
x1