Bristan PIV BSM C Manuel d'instructions d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Bristan PIV BSM C. Bristan PIV BSM C 16 pages.

Imprimer la page

Installation

Bath Filler / Bath Shower Mixer

1. Slide the plinths onto the threaded tails

2. Fit the bath filler / bath shower mixer

to the bath ensuring that the washers are

fitted between the plinths and the bath to

create a water tight seal.

3. Secure the body to the bath using the

washers and metal backnuts. Tighten the

backnuts onto the threaded tails.

A suitable spanner may be required to

fully tighten the backnuts.

4. Connect the hot and cold water

supplies to the threaded tails using

a 3/4" BSP connector (not supplied).

5. Bath Shower Mixer only - fit the shower

hose to the hose outlet using the small

sealing washer, and the handset to the

hose using the small washer.

Important: Prior to the drilling into

walls, check there no hidden electrical

wires, cables or water supply pipes with

the aid of an electronic detector.

If you use power tools do not forget to:

• Wear eye protection

• Unplug equipment after use

Fit the wall bracket (not shown) to the

wall using the fixings supplied, ensuring

the handset and hose reaches it.

6. Turn on both water supplies and turn

both handles to the on position, letting the

water flow for a few minutes.

7. Check all joins and connections for any

leaks.

8. To switch from bath to shower mode,

pull the diverter knob up and twist, to

revert back to bath filling mode twist and

push the diverter knob back down.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.