Bristan W BATH07 C Instructions d'installation et manuel de l'utilisateur - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel de l'utilisateur pour {nom_de_la_catégorie} Bristan W BATH07 C. Bristan W BATH07 C 4 pages. Exposed clicker waste with exposed clicker waste with overflow over
Imprimer la page
Introduction
Thank you for choosing Bristan, the UK's leading taps and showers expert. We have designed this
product with your enjoyment in mind. To ensure that it works to its full potential, it needs to be
fitted correctly. These fitting instructions have been created to give you all of the information you
need and, if you need any further help, please do not hesitate to give us a call on 0330 026 6273.
Installation
1.
Identify all components are present prior to installation
2. Unscrew clicker mechanism (5) from flange (4). Remove flange (4) from the waste body (1).
3. Secure the waste body (1) underneath the bath by screwing flange (4) and waste body (1)
together. Ensure rubber washer (2) and silicone washer (3) are in place.
4. Screw clicker mechanism (5) beck into flange (4). DO NOT OVERTIGHTEN
5. Loosely secure the sealing washer (11) and the nut (12) to hold the L pipe (6) into the waste
body (1). Insert L pipe (6) into the waste body (1), tighten nut (12).
6. Use the same process to assemble the over flow elbow (10) to the L pipe (6).
7. Secure the overflow elbow (10) to the bath using the overflow cap (7), ensuring rubber
washer (8) and (9) are in place.
8. Tighten nuts (12) to secure l pipe (6) into place.
9. Ensure waste is installed where exit pipework can be connected.
10. Check all joints and connections for leaks
1.
Waste Body
2. Rubber Washer
3. Silicone Washer
4. Flange
5. Click Mechanism
6. L Pipe
7. Over Flow Cap
8. Rubber Washer
9. Rubber Washer
10. Over Flow Elbow
11. Sealing Washer
12. Hex Nut
8
1
0
11
12
6
7
9
5
4
3
2
1