GreeenTek Whole House HS 3.0 Manuel d'installation, d'entretien et d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'entretien et d'utilisation pour {nom_de_la_catégorie} GreeenTek Whole House HS 3.0. GreeenTek Whole House HS 3.0 11 pages.

Imprimer la page

1. Changing Filters

FMA

maintenance system

In order to improve air quality

and offer the best possible air

quality in your home, Greentek

developed one of the first maintenance service

systems in the industry. The "Filter Maintenance

Adviser

" will remind you by e-mail when the

filter of your Whole House HEPA System must be

replaced, to maximize its performance and effi-

ciency.

For more information call toll free:

1 888 724-5211

or visit us at: www.greentek.ca

When should I

Service my Unit?

service and accessories

Detailed maintenance information is located on

the front decal on motor plate.

PRE-FILTER AND CARBON

FILTER

Replace filters every 3 to 6 months or as needed.

HEPA FILTER

Replace filter every 2 to 5 years or as needed.

Check regularly to maintain maximum

performance from your HVAC system.

For replacement filters, contact your local HVAC

contractor.

INSIDE THE UNIT

Once a year or as needed, clean the interior of the

unit (Wall and Motor Plate) with a mild and non-

abrasive soap. It is recommended to use products

that are environmentally friendly.

Note

to installer

IMPORTANT : ALWAYS UNPLUG UNIT

BEFORE SERVICING

Maintenance

4. General Maintenance Information

4.1 Changing Filters

After opening the unit's door, grasp both edges of filter

and pull with equal force to slide out the filter.

has

4.2 Cleaning

Once a year or as needed, clean the interior of the unit

(Wall and motor plates) using mild non-abrasive soap

and water. It is recommended to use products that are

environmentally friendly.

4.3 Troubleshooting

Troubleshooting

Unit does not operate

Unit operates only on one speed.

Unit vibrates

4.4 Electrical Wiring Diagram

Black

Speed

Selection

Door

Interlock

P AGE 10

GUIDE

Suggestions

• Is power cord fully inserted in the unit's

connector?

• Is outlet powered?

• Is door interlock switch operating?

Possible loose wire inside electrical box,

contact your local contractor.

Check for excessive dust builup or missing

balancing weight on the impeller wheel.

Blue

Brown

2.5uf

7.5uf