Gamma 5003 Manuel du propriétaire - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gamma 5003. Gamma 5003 20 pages. 6 point mounting
Également pour Gamma 5003 : Manuel du propriétaire (19 pages), Manuel du propriétaire (20 pages), Manuel du propriétaire (20 pages)

Imprimer la page

until the "1" or "2" mark on the knob aligns with the line on the knob support. To decrease

tension by 1 or 2 lbs, turn the knob clockwise until the "2" or "1" mark on the knob aligns with

the line on the knob support.

STRINGING THE FRAME

Travel Stop

Setting Tension

The tensioner utilizes a rotary adjusting knob

along with a linear tension scale to indicate

the tension setting. The scale is divided into

3 lb. increments and each 1/3 turn of the ten-

sion knob changes tension by 1 lb. To set the

desired tension, rotate the tension knob and

align the mark on the spring guide with the

desired tension setting on the scale. When

the "0" mark on the knob aligns with the line

on the knob support the tension will be that

indicated on the scale. To increase tension

by 1 or 2 lbs turn the knob counterclockwise

Setting the Gripper Jaw Spacing

The gripper jaws of the tensioner are adjust-

able to accommodate varying string gauges.

If the string slips through the gripper jaws

while pulling tension, rotate the gripper jaw

adjustment screw counter-clockwise.

If the string is damaged while pulling tension,

rotate the gripper jaw adjustment screw

clockwise.

The jaws will be properly adjusted when

there is enough pressure to securely grip the

string without causing damage to the string.

Tensioner Travel Stop

To prevent contact between the tension head

and the racquet and/or turntable, a travel stop

is located about midpoint along the tensioner

bar below the gear track. In the event the

tension head must be moved closer to the

racquet, pull and turn the travel stop 90 de-

grees. To re-engage the travel stop, simply

pull and turn the travel stop 90 degrees.