Gamma 5003 Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gamma 5003. Gamma 5003 20 pages. 6 point mounting
Également pour Gamma 5003 : Manuel du propriétaire (19 pages), Manuel du propriétaire (20 pages), Manuel du propriétaire (20 pages)

Imprimer la page

ASSEMBLY INSTRUCTIONS

MOUNTING THE FRAME

Adjusting the Inner Racquet Supports

The white racquet supports are adjustable to accommodate

all racquets and provide maximum support to the racquet

frame. Screw the pads up or down so they contact the

frame at a maximum height without blocking the grommet

holes.

BRIDGE

Height Adjustment

The turntable height can be adjusted to suit

the stringer. To adjust, loosen the two set

screws on the lower column support post be-

low the bellows assembly. Adjust the amount

of engagement between the upper and lower

column supports until the desired height is

attained. Make sure that the tension track is

still aligned with the long leg of the base and

tighten the two set screws to lock the upper

support column into place.

Special Throat Mounting

Racquets with a bridge that is thinner than

the rest of the frame or are tapered from

head to throat require special mounting

to ensure the frame is not damaged. The

white support pads need to be moved

from the inside of the racquet bridge to the

throat of the racquet.