Gamma 6004 Manuel du propriétaire - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gamma 6004. Gamma 6004 19 pages. 6 point mounting
Également pour Gamma 6004 : Manuel du propriétaire (20 pages), Manuel du propriétaire (20 pages), Manuel du propriétaire (20 pages)

Imprimer la page

MAINTENANCE & ADJUSTMENTS

The clamp jaws should be cleaned periodically to be free from dirt, oil, and any string coating

for them to grip properly.

Note: The string clamps supplied with your stringing machine can accomodate tight string

patterns such as badminton. Depending on the string pattern, the clamp may spread the strings

slightly which will not compromise the quality of the string job.

String Clamp Adjustment

The string clamps will need minor adjustments according

to string type, construction, and gauge.

To adjust the gap (clamping pressure) between the

clamp jaws, insert the string through the racquet as if

you were beginning the main strings. Clamp the string

and pull tension. If the string slips through the jaws of the

clamp, tighten the clamp by compressing the clamp jaws

together by hand while turning the Adjustment Knob, in

the clockwise direction. If the clamp leaves impressions

Adjustment

or damages the string, it may be excessively tight and

Knob

should be adjusted by turning the Adjustment knob

counter clockwise to open the gap between the jaws.

Switch Action Clamp Base Adjustment

If the Switch Action clamp bases slip on the

turntable, the base locking levers may need

adjusted. Turn the hex screw clockwise to

tighten the clamp and counterclockwise to

loosen.

If frequent adjustment is needed,

remove the adjustment screw and tighten the

two screws underneath of the clamp. Re-

install the adjustment screw.

Switch Action Clamp Base Removal

If the Switch Action clamp base needs to be

removed, undo the 2 screws holding the FPR

stop, underneath of the turntable. Remove

the FRP stop and clamp for cleaning, adjust-

ment or replacement.