Gamma Progression STII Manuel du propriétaire - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Gamma Progression STII. Gamma Progression STII 19 pages.

MOUNTING THE FRAME

Adjusting the Frame Support Posts

Loosen the lock bolts of the frame support

posts and space them apart with the frame

support slides separated by the approximate

length of the racquet head. Although it is not

required, it is good practice to center the

support posts on the turntable. Lock one of

the posts in position by tightening the lock

bolt and position the other post until the

frame support slide is positioned near the

inside surface of the racquet frame. Se-

curely tighten the lock bolt of the second

support post.

Caution: To avoid racquet damage, the

center posts should not contact the racquet

prior to locking down the support posts.

Tightening the Frame Supports

Tighten the Frame Support Slides by turning

the adjustment knob clockwise until snug

against the racquet frame and slight resis-

tance is felt.

Caution: Overtightening the Center Sup-

ports will stretch the head of the racquet and

could cause racquet damage.

Frame Shoulder Support Adjustment

Being sure the shoulder supports are free to

swivel in their mountings, simultaneously

rotate the shoulder support adjustment knobs

clockwise until both shoulder supports gen-

tly and squarely contact the frame.