Gamma LED Leko 200 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Gamma LED Leko 200. Gamma LED Leko 200 12 pages. Cool white and warm white 200w led spot

Imprimer la page

Please refer to the diagram below:

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, it is recommended to use a DMX terminator. This helps in preventing

corruption of the digital control signal by electrical noise and reflections. The DMX

terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,

which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below:

DMX Modes and Configuration

The LED Leko 200 has multiple DMX modes, sometimes called "personalities", "profiles", or

as we will use here "modes".

In general, modes with more DMX channels offer a greater level of control or options but

take up more of your output channels on your lighting console or software.

Modes with less DMX channels often offer less control, but may be plenty for your needs.

Depending on your needs and control solution, you may not need channels for

automated programs, strobes, or macros – your console may have great effects! In this

case, you can use a lesser channel mode and fit more lights per DMX universe.

View the DMX mode charts below to find the mode that best suits your needs.

LED Leko 200 CW/WW – GAMMA LED Vision

Page 8 of 12