Decibel Eleven Hot Stone SMD Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Decibel Eleven Hot Stone SMD. Decibel Eleven Hot Stone SMD 4 pages.

Imprimer la page

Overview

Front Panel:

1 Power indicator LED is lit when Hot Stone is powered on.

5.5mm x 2.1mm DC output jacks

Rear Panel:

3 AC Input Voltage Switch – set to proper voltage prior to plugging in the Hot Stone.

AC Inlet - standard IEC connector.

The Hot Stone Deluxe has a replaceable cartridge type fuse. Should your Hot Stone

Deluxe stop working, where there is no power being supplied to your pedals and

the green power indicator on the Hot Stone front panel is not lit, it is recommended

to check the condition of the fuse.

To access the fuse, first be absolutely certain that the unit is detached from

its AC power cable. Then, remove the 2 flat head screws along the bases of the

front and rear panels. Carefully remove the bottom cover from the unit. The fuse

is located at the AC power cable inlet connector. Please be sure to replace the fuse

with the same type and rating: 5x20mm, 250V/500mA SLO BLO

FUSE REPLACEMENT