Gamma Rayon Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Gamma Rayon. Gamma Rayon 12 pages. 6-head rgb moving head laser light

Imprimer la page

Introduction and Setup

Unpacking and In the Box

Thank you for choosing our Rayon. For your own safety, please read this manual before

installing or using the device. This manual covers the important information on installation and

applications. Please install and operate the fixture with following instructions. Meanwhile,

please keep this manual for future needs.

In the box you will find:

Rayon Fixure:

•

PowerCon Cable:

•

DMX Signal Cable

•

Omega Mounting Clamps 2

•

Mounting and Operation

Clamp Mounting: The Rayon moving head provides a unique mounting bracket assembly

that integrates the bottom of the base, and the safety cable rigging point in one unit.

When mounting this fixture to truss be sure to secure an appropriately rated clamps to the

included omega brackets using a M10 screw fitted through the center hole of the "omega

brackets".

As an added safety measure be sure to attached at least one properly rated safety cable

to the fixture using on of the safety cable rigging point integrated in the base assembly.

Features

The Rayon laser fixture features 2 sets of Red, Green, and Blue Lasers that can pan

together and tilt independently for dynamic effects.

Safety Precautions

Before connecting or disconnecting the power turn off power of the LASER diode to

avoid any damage to it.

Turn off the system for 25 minutes after running continuously for three hours; ensure

the system is able to cool down in a suitable environment.

Please keep this User Guide for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction manual.

Rayon – GAMMA LED Vision

Page 3 of 12