Decimator MD-HX Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Decimator MD-HX. Decimator MD-HX 11 pages. Hdmi / (3g/hd/sd)-sdi cross converter with scaling and frame rate conversion
Également pour Decimator MD-HX : Manuel d'utilisation (11 pages)

Imprimer la page

Main Menus

Upon power up the unit will start in the Main Menu pointing to Input Status.

The Main Menus are:

1. Input Status

2. Control

3. Scaling

4. Audio

5. Setup

Press the < and > buttons to move left or right through the menus.

To enter into a menu press the ENTER button.

Notes:

1.) Defaults are highlighted in yellow.

2.) When an option is changed, a highlighted S will appear in the top right of the LCD screen and will

disappear when the options are saved after 10 seconds. Avoid powering down the unit during this

time.

3.) You can always return to the Main Menu by pressing the BACK button twice.

4.) As you move through the menus changing parameters, they will be instantly applied to the output

signal.

5.) Scaler and DUC (Down Up Cross conversion) are used interchangeably in the MENUs.

Input Status: (Has no SUB‐MENUs)

Input Status

S:3GB 1080p59.94

H:ED 480p59.94

D:HD 1080i59.94

The input shows the current SDI and HDMI input status as well as the DUC output format status.

Control: (Has SUB‐MENUs)

Control

SDI OUT SOURCE

SDI IN

When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.

Press the < and > buttons to move left or right respectively through the 8 menus below and press the BACK

button to go back to the Main Menu when finished.

The current value for each Sub Menu is shown in the Parameter Window.

1. Control / SDI OUT SOURCE (Parameter)

This is the current source for the SDI output.

When the sub menu is highlighted, press ENTER to toggle through the following sources:

1.) SDI IN

2.) HDMI IN

3.) Scaler

2. Control / HDMI OUT SOURCE (Parameter)

This is the current source for the HDMI output.

When the sub menu is highlighted, press ENTER to toggle through the following sources:

1.) SDI IN

2.) HDMI IN

3.) Scaler

MD‐HX OPERATING MANUAL VERSION 1.3

E&OE

Main Menu <==

Current SDI input format

Current HDMI input format

Current Scaling output format

Main Menu <==

Sub Menu

Parameter Window

Output from Scaler