Decimator DMON?12S Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Decimator DMON?12S. Decimator DMON?12S 16 pages. 1 to 12 channel (3g/hd/sd)?sdi multi?viewer with sdi and hdmi outputs

Imprimer la page

9. Control / Format Status (Parameter)

When an input is detected the DMON‐12S will display the format detected in the top left of each window by

default unless the location has been modified via the USB Control Panel. When the sub menu is highlighted,

press ENTER to toggle through the following selections:

1.) Show for 5 sec

2.) Show Always

3.) Off

10. Control / Audio Source ID (Parameter)

The Audio Source Identification icon will appear when selecting which window the audio will be passed from

to the output when in multi‐viewer mode. This option toggles whether the icon is shown to indicate the

window source the audio is coming from. This icon appears in front of the Format Status. When the sub menu

is highlighted, press ENTER to toggle through the following selections:

1.) Show for 5 sec

2.) Show Always

3.) Off

11. Control / Apply Tally to (Parameter)

The Apply tally to parameter allows the selection of the 3 different types of tally indicators. When a tally is

triggered it can be displayed as a small box on the bottom left (default position) of the inputs window or as

border around the window. The Tally can also fill the outside of the safe action box. When the sub menu is

highlighted, press ENTER to toggle through the following selections:

1.) Border

2.) Out Safe Action

3.) Tally Boxes

11. Control / Tally Transparency (Parameter)

The Tally transparency feature changes the transparency of the tally box / border / Outside safe Action. When

the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) 0%

2.) 25%

3.) 50%

Routing: (Has SUB‐MENUs)

Routing

Window 1 Source

Input 1

When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.

Press the < and > buttons to move left or right respectively through the 12 menus below and press the BACK

button to go back to the Main Menu when finished.

The current value for each Sub Menu is shown in the Parameter Window.

1. Routing / Window 1 Source (Parameter)

This is the input source for Window 1.

When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.

Press the < and > buttons to move left or right through the following sources:

1.) Input 1

2.) Input 2

3.) Input 3

4.) Input 4

5.) Input 5

DMON‐12S Hardware Manual for Firmware Version 1.1

Main Menu <==

Sub Menu

Parameter Window

(default for Window 1)

(default for Window 2)

(default for Window 3)

(default for Window 4)

(default for Window 5)