JAKKS Pacific Animal Babies Nursery Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} JAKKS Pacific Animal Babies Nursery. JAKKS Pacific Animal Babies Nursery 2 pages.
Imprimer la page
battery installation
instructions
Batteries included are for "Try
Me" purposes only. If perfor-
mance diminishes after purchase,
replace with fresh batteries.
Requires 3 x AG13 (LR44)
batteries (included).
ADULT INSTALLATION
REQUIRED
1-2 Locate battery compartment
on back as shown in illustration.
3 Using a Phillips Head Screw-
driver, remove the screw and
battery door.
4 Install 3 new AG13 (LR44)
batteries.
5 Replace the battery cover and
the screw. Retun the battery
compartment to the baby and
close the fabric.
let's play
1 Move the ON/OFF Switch to the
2 Position Tumbling Baby as shown.
ON position.
1
2
3
4
3 Gently push the Tumbling Baby forward.
BATTERY SAFETY INFORMATION
WARNING! Battery acid leakage can cause personal injury and case damage to the
product and surrounding property. If battery leakage occurs, thoroughly wash any affected
skin, making sure to keep battery acid away from eyes, ears, nose, and mouth.
Immediately wash any clothing or other surface that comes in contact with leaded battery
acid. Leaking batteries may make "popping" sounds. Dispose entire toy according to
Local, State or Federal Battery Laws.
NEVER mix old and new batteries or different brands of batteries.
NEVER mix alkaline, standard (carbon-zinc), rechargeable (nickel-cadmium) batteries
with this product.
NEVER dispose of batteries in fire, as they may leak and explode.
NEVER use rechargeable batteries.
NEVER attempt to charge non-rechargeable
batteries.
ALWAYS remove exhausted batteries from toy.
ALWAYS have an adult install batteries
consistent with installation instructions
ONLY use batteries specified by manufacturer.
Batteries are to be inserted with the
5
correct Polarity.
The supply terminals are not to be
short-circuited.
4 Tumbling Baby rolls over.