Major MT 730 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Major MT 730. Major MT 730 16 pages. Ac clamp meter

Before making measurements ensure that the

function selector switch is set on the

appropriate range position.

Always make sure that the plug of each test

lead is inserted fully into the appropriate

terminal of the meter.

Ensure that the function selector switch is set

to the "OFF" position after use. When the

meter will not be in use for a long period of

time, place it in storage after removing the

battery.

Do not expose the meter to direct sunlight,

extreme temperatures or moisture.

Do not use abrasives or solvents on the meter.

To clean it use a damp cloth and mild

detergent only.

Qualified and trained service technicians should

only perform calibration and repair of the meter.

3. FEATURES

Large 2000 count LCD display with bright

white LED backlight.

Wide measuring range from 0.01A AC up to

600A AC

Measures AC and DC Voltage up to 600 volts

Measures resistance from 0.01Ω up to 20MΩ.

Designed to the international safety standard

IEC61010 CAT lll 600V / CAT ll 1000V,

Pollution degree 2.

Max Hold records the highest reading in the

current and voltage ranges.

Auto Power Off after approximately 15

minutes to conserve battery life.

Continuity Buzzer <120Ω

Diode Test current 0.3mA typical.

Low battery indication.

30mm Maximum conductor size.

Data Hold switch used to freeze reading on

display.

! !

CAUTION