Bristolite Solar Breeze Instructions d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Bristolite Solar Breeze. Bristolite Solar Breeze 4 pages. Attic fans

Imprimer la page

Installation...

Please allow about an hour for installation. Components and

hardware are referenced in each step to the corresponding

letters on parts list (on front page).

IMPORTANT NOTE:

Roof rafters are generally 16" or 24" on center. On 16" on center

construction, the installer can either cut a 14" hole between the

rafters or cut a 19" hole with the roof rafter running through the cut

hole. On 24" on center construction, cut a 19" hole between the

roof rafters. Follow the steps for the opening size needed for

your specific application.

STEP 1

Choose location for the Solar Breeze Attic Fan unit, south exposure

is best. If a southern exposure is not feasible for your installation,

the fan can be installed on any other exposure and the solar panel

adjusted to capture maximum sunlight.

19"

1 1 9 9 " "

STEP 2

Hammer a nail at the center of the location chosen between rafters

for the Solar Breeze Attic Fan. The center of the unit should be

about 2 feet down from the ridge.

19" HOLE: Attach a string to the nail. Measure 9.5" of string and

attach a marking pen to the string, see diagram. Scribe a 19"

circle onto the roof shingles.

14" HOLE: Attach a string to the nail. Measure 7" of string and

attach a marking pen to the string, see diagram. Scribe a 14"

circle onto the roof shingles

IF POSSIBLE,

INSTALL UNIT

BETWEEN

ROOF RAFTERS

14"

STEP 3

With a reciprocating saw, cut the diameter of the hole. NEVER

CUT THROUGH ANY ROOF RAFTERS. LEAVE ALL FRAmiNG

mEmbERS iN pLACE.

19" HOLE: On 24" on center construction, center the fan between

the rafters.

14" HOLE: On 16" on center construction, the installer can either

cut a 14" hole between the rafters or cut a 19" hole with the roof

rafter running through the cut hole - do not cut the rafter (see

illustration below).

IMPORTANT: The Solar Breeze Attic Fan must be installed between

the roof rafters OR over a roof rafter. DO NOT CUT THROUGH ANY

FRAMING MEMBER. Only remove roof sheathing.

RECOMMENDED:

HOLE CUT

BETWEEN RAFTERS

OPTION:

16" ON CENTER

WITH 19" HOLE

DO NOT

CUT ROOF

RAFTERS

OPENING

BETWEEN

RAFTERS