Major Manufacturing HIT-66-295 Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Major Manufacturing HIT-66-295. Major Manufacturing HIT-66-295 9 pages.

Imprimer la page

Major Manufacturing HIT-66-295 Manuel d'instructions

With both clamps opened equally,

install both inside and outside

templates to the HIT-66 clamp as

shown. Do not tighten the 10-32

screws at this time. When all

screws have been loosely

installed, then it is ok to tighten.

NOTE: The HIT-66 clamps

shown are not part of the

HIT-66-295 template set and

must be purchased as a

separate item.

Install the alignment

guide to either side of

the template set. This is

used to align the

template with the mortise

pocket.

Shown is a standard

mortise pocket, we will

use this as a basis for

the Yale mortise lock

install.

PAGE 3