Green Blue GB405 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Green Blue GB405. Green Blue GB405 4 pages.

Imprimer la page

Installation

The Tumble Dryer should be put on a horizontal and solid ground, table or specialized bracket.

It should be installed 10-15cm away from the back wall. When used in a narrow space, please

install air fans or install exhaust pipe in the outlet to exhaust the hot and humid air out of the

room. The length of the exhaust pipe should not exceed 2 meters(the exhaust pipe is not included).

1. Installation of Exhaust Connector

Adjust the direction of the exhaust connector according to actual needs, then putting it into

the buckle clockwise.

2.Horizontal Installation of theTumble Dryer

Keep the top side of the dryer up. When the dryer is placed on horizontal

ground or table, please make sure that the ground or table is solid and level.

3.Other Installation Options

· Bracket Installation (Bracket is not included)

When installing the Dryer on a bracket or stand, ensure the

installation will be firm and solid. To provide proper air flow,

allow at least 13cm(5 inches) between the rear of the Dryer

and the wall.

· Wall Mounting the Dryer

Identify the location to mount the dryer, ensuring the wall is solid and that there is ample

distance above the dryer (~50mm/2 inches). If mounting above a Washing Machine, always

allow enough space for the Washing Machine's cover to open.

a. Mark and attach the positioning paper to the wall.

b. Fasten the hook to the wall with expansion screws (M6).

c. Hang the dryer on the hook safely.

d.Install the wall spacers as shown.

23mm

13cm

485mm

482.5mm

436.5mm

Ø9mm

44mm

Maintenance

In order to ensure the normal use of the dryer, please clean the outlet and intake filter frequently,

and clean the Dryer regularly. Please disconnect the power plug before cleaning!

Air Outlet Filter Cleaning

Please Clean the Air Outlet Filter After Each Use.

Remove the filter: put your hand

into the inner drum of the machine

and insert it into the four holes near

the center of the outlet air hood.

Pull the filter outward.

Line crumbs cleaning: remove the air

outlet cover filter cotton and filter

screen respectively, and use a soft

brush or vacuum cleaner toclean the

lint and threads.

Installation of the filter: after cleaning,

assemble the filter in the order of

filter screen, filter screen cotton and

air outlet cover, then put the filter

into the inner drum, make sure it is

properly installed.

Air Inlet Filter Cleaning

Hold the middle part of the air inlet

filter cover and push it out slightly,

then remove it.

Use a soft brush or vacuum cleaner

to clean the dust on it.

After cleaning, put the filter back

into the machine.

Overall Cleaning

Use a wet soft cloth to clean the inner

drum or outside of the dryer. Use a

small amount of kitchen detergent to

clean any difficult stains - then wipe

with a clean cloth.

Note: Never use gasoline or other

non-cleaning agents on Dryer surfaces.

Air outlet

Filter

Filter Screen

cover

screen

cotton

Dust

Lint Filter

Lint

Exhaust Filter

Cleaner