DECK DOLLY JD 7 Series Manuel d'instructions de montage - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} DECK DOLLY JD 7 Series. DECK DOLLY JD 7 Series 8 pages. With 7 iron deck and others

Imprimer la page

Operating Instructions:

Lay the dolly over the mower deck engaging the bottom bracket hooks with

the bolts in the rear mount of the deck and the upper mount rod engaging

the front hook on the deck..

II.

Once the deck's mounting bolt is in the dolly bracket and the top dolly shaft

is engaged with the deck's front hook, flip latch so that the top hole in the

Latch aligns with the hole in the leg of the dolly.

III.

Pass the safety pin included with the kit through the hole and then through

the Safety Latch and position the catch on the safety pin over the pin. See

picture above.

IV.

This Latch will not allow the deck to slip off the dolly and incur physical

harm to the operator.

NOTE: These instructions are guidelines. Some variation may be required depending

on the mower deck. Please read and understand the directions before assembly.

Thanks for your purchase and check out the videos on deckdolly.com/support.