IKEA 103.810.23 Manuel - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA 103.810.23. IKEA 103.810.23 36 pages. Built-in electrical oven

Imprimer la page

ENGLISH

•

Clean the surfaces with a damp cloth.

If it is very dirty, add a few drops of

washing up detergent to the water.

Finish off with a dry cloth.

Oven interior

IMPORTANT: do not use abrasive

sponges or metallic scrapers or scourers.

Over time, these can ruin enamelled surfaces

and the oven door glass.

•

After every use, allow the oven to cool

then clean it preferably while it is still

warm in order to remove built-up dirt

and stains caused by food residues (e.g.

food with a high sugar content).

•

Use proper oven detergents and follow the

manufacturer's instructions to the letter.

•

Clean the door glass with a suitable

liquid detergent. The oven door can

be removed to facilitate cleaning (see

MAINTENANCE). Inner glass is smooth

to facilitate cleaning.

NOTE: during prolonged cooking of foods

with a high water content (e.g. pizza,

vegetables, etc.) condensation may form on

the inside of the door and around the seal.

When the oven is cold, dry the inside of the

door with a cloth or sponge.

WARNING!

During and after the Pyrolytic cleaning,

every pets (especially birds) have to

be kept away from the area of the

appliance location.

Accessories

•

Soak the accessories in water with

washing up detergent immediately after

use, handling them with oven gloves if

still hot.

•

Food residues can be easily removed

using a brush or sponge.

MAINTENANCE

WARNING!

Use safety gloves.

Ensure the oven is cold before carrying

out the following operations.

Disconnect the oven from the power supply.

To remove the shelf guides

firmly grip the external part of the guide,

and pull it towards you to extract the

support and the two internal pins from the

lodging.

To reposition the shelf guides

position them near the cavity and initially

insert the two pins into their lodgings. Next,

position the external part near

its lodging, insert the support, and firmly

press towards the wall of the cavity to make

sure the shelf guide is properly secured.

To remove the door

1. Open the door fully.

2. Lift the catches and push them forwards

as far as they will go (Fig. 1).

3. Close the door as far as it will go (A), lift

it up (B) and turn it (C) until it is released

(D) (Fig. 2, 3, 4).

Fig. 1