DECKED DS2 Manuel d'instructions d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} DECKED DS2. DECKED DS2 13 pages. For ford super duty 6'9” bed length 1999-2016
Imprimer la page
ASSEMBLY: DRIVER'S SIDE DECK
• There are three pre-installed gaskets – one on the center vert, one on each underside of the decks where they rest
on the center vert. Do yours look weird? (They should be flat.) See them here: DECKED.COM/GASKETS
• Place C-channel on the inside ledges of a cabside ammo can and a tailgate ammo can.
• The end of the C-channel with the endplate must rest on the cabside ammo can.
• Verify that the tailgate ammo can' s axle is closest to the tailgate; if not, grab the other tailgate ammo can.
• Install nylon washers onto all bolts in BAG C-CHANNEL, WASHERS .
• Loosely bolt C-channel to the two ammo cans. Make sure the bolt head is in the C-channel, not inside the ammo
can; BAG C-CHANNEL. Don't tighten yet. Houston, come in Houston, do you copy? Don't tighten yet.
• Line up the driver's side deck (sticker or mark on end of deck panel indicates LEFT/DRIVER) on top of the
C-channel/ammo can assembly and the center vert bosses.
installed; the center vert axle and ammo can axles must be on the tailgate end (not cabside end) of the assembly.
• Use WASHERS bag to install nylon & rubber washers on all CS AMMO CAN bolts. Install the same washers on 12 B1 bolts.
• Use the above bolts to bolt the deck to the ammo cans; BAG B1 for the tailgate ammo can, BAG CS AMMO CAN for the
cabside ammo can.
• Now tighten the loose bolts connecting the ammo cans to the C-channel.
• Bolt the deck to the center vert; BAG B1 (no washers).
Set drill clutch to LIGHT.
DRIVER SIDE DECK HALF
NYLON
WASHER
RUBBER
WASHER
NYLON
WASHER
C-CHANNEL BAG
C-CHANNEL
TAILGATE AMMO CAN AXLE
DECKED.COM | #DECKEDUSA | @DECKEDUSA
(LET'S DO THIS!)
If you must use power tools, use with caution!
B1
WASHERS BAG
CABSIDE AMMO CAN
Hey Sparky: Tailgate end of the center vert has an axle
RECOMMENDED TORQUE: Bolts in labeled bags
C-CHANNEL, CS AMMO CAN and B1 - 27 in-lb.
VERT AXLE
CS AMMO CANS
B1
NO WASHERS
CAB
C-CHANNEL ENDPLATE
DS1/DS2 | v.8 | Page 5