KitchenAid Architect Series KGCP467JSS Manuel des dimensions
Parcourez en ligne ou téléchargez le pdf Manuel des dimensions pour {nom_de_la_catégorie} KitchenAid Architect Series KGCP467JSS. KitchenAid Architect Series KGCP467JSS 1 pages. Kitchenaid architect series kgcp462kss: install guide
Imprimer la page
PRODUCT MODEL NUMBERS
KGCP462K
KGCP482K
KGCP463K
KGCP483K
KGCP467J
KGCP484K
KGCP487J
Gas supply: Cooktop is equipped for use with
NATURAL gas. Cooktop can be converted to L.P.
gas. Gas supply line of 3/4" rigid pipe to cooktop
location. If local codes permit, a new AGA or CSA
design-certified, 4-5 foot (1.2-1.5 m) long, 1/2" or
3/4" I.D., flexible metal appliance connector is
recommended for connecting cooktop to gas
supply line. Pressure regulator has 3/8" female
pipe threads. The supply line shall be equipped
with an approved shutoff valve.
Electrical: Electrical: 120-volt, 60-Hz, AC-only,
15-amp. electrical supply. Use copper wire only. A
time-delay fuse or circuit breaker and separate
circuit is recommended.
It is recommended that an overhead vent hood be
used with this cooktop. For island installations, a
48" (122 cm) hood is recommended.
Cooktop location should be away from strong draft
areas, such as windows, doors and strong heating
vents or fans.
CABINET OPENING DIMENSIONS
3-prong ground-type outlet
should be located on left hand
side of cutout 8" (20.3 cm)
max. from enclosure sidewall.
14"
10" (25.4 cm)
(35.6 cm)
Gas supply line should be
located in this area on rear or
side walls, or the supply line can
come up through the floor.
Gas and Electric
Connection Locations
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
®
Gas Cooktop
OVERALL DIMENSIONS
36" (91.4 cm) cooktop with
all sealed burners shown
36" (91.4 cm) long
3-prong ground-type
power supply cord
36" (91.4 cm) cooktop: 35-7/8" (91.1 cm)
48" (121.9 cm) cooktop: 47-7/8" (121.6 cm)
Note: Solid side
and bottom of
48" (121.9 cm)
cutout enclosure
not shown.
Note: Dimension "B" can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is protected by not less than 0.25" (6.4 mm)
flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel,0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
notch to be equal
both sides.
D
7-1/4"
(18.4 cm)
E
CORNER NOTCH
DETAIL
A
size
model
island trim
backguard island trim
36" (91.4 cm)
KGCP462K
5"
KGCP463K
(12.7 cm)
KGCP467J
KGCP482K
6"
(15.2 cm)
KGCP483K
5"
(12.7 cm)
KGCP484K
6" (15.2 cm)
KGCP487J
5"
(12.7 cm)
18" (45.7 cm) min.
clearance upper
cabinet to countertop
see corner
22-1/4"
notch detail
(56.5 cm)
2"
(5.1 cm)
E
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
backguard (shown)
or island trim
26-1/4" (66.7 cm)
gas inlet is located 1-7/8"
(4.8 cm) from back of burner
box and
4-7/8" (12.4 cm) in from L.H.
side of burner box
side view
of cooktop
7/8"
(22.2 mm)
2-3/16"
22" (55.9 cm)
(55.6 mm)
B (min.)
backguard cabinet and
backguard
opening
1-3/4"
48" (121.9 cm)
(4.4 cm)
(91.4 cm)
48" (121.9 cm)
1-3/4"
48"
48"
(4.4 cm) (121.9 cm)
(121.9 cm)
(121.9 cm) (120.0 cm)
48"
(121.9 cm)
5"
48" (121.9 cm)
(12.7 cm)
C
13" (33 cm) max.
upper cabinet depth
C
3/4" (1.9 cm)
6-7/8" (16.1 cm)
4-3/4"
(12.1 cm)
D
for 48" (121.9 cm)
8 burner model only:
6" (15.2 cm)
all other models:
9" (22.9 cm))
7-1/2" (19.1 cm)
26-1/4" (66.7 cm)
for 48" (121.9 cm)
8 burner model only:
6" (15.2 cm)
all other models:
9" (22.9 cm)
3/8"
(9.5 mm)
7-1/8"
(18.1 cm)
1-3/16"
(30.2 mm)
C
D
E
countertop
countertop only
36"
35-1/4"
36" (91.4 cm) or
(89.5 cm)
35-7/8" (91.1 cm)
for zero clearance fit
48"
47-1/4"
48" (121.9 cm) or
47-7/8" (121.6 cm)
for zero clearance fit
B
min.
A
12-5/16" (31.3 cm)
min. clearance to
side wall -
24"
both sides
(61 cm)
base cabinet
Ref. 8285479
09-29-03