IKEA 804.132.33 Manuel - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} IKEA 804.132.33. IKEA 804.132.33 40 pages.
Également pour IKEA 804.132.33 : Manuel (44 pages)

Imprimer la page

ENGLISH

2. Lift and pull the latches until they click.

3. Close the oven door halfway to the first

opening position. Then lift and pull to

remove the door from its seat.

4. Put the door on a soft cloth on a stable

surface.

5. Hold the door trim (B) on the top edge of

the door at the two sides and push

inwards to release the clip seal.

6. Pull the door trim to the front to remove

it.

7. Hold the door glass panels by their top

edge and carefully pull them out one by

one. Start from the top panel. Make sure

the glass slides out of the supports

completely.

8. Clean the glass panels with water and

soap. Dry the glass panels carefully. Do

not clean the glass panels in the

dishwasher.

9. After cleaning, install the glass panels,

the door trim and the oven door, close

the latches on the both hinges.

If the door is installed correctly, you will hear

a click when closing the latches.

Make sure that you put the glass panels (A, B

and C) back in the correct sequence. Check

for the symbol / printing on the side of the

glass panel, each of the glass panels looks

different to make the disassembly and

assembly easier.

The screen-printing zone must face the inner

side of the door. Make sure that after the

installation the surface of the glass panel

frame on the screen-printing zones is not

rough when you touch it.

When installed correctly the door trim clicks.