Centurion D5-EVO REPAIR Manuel d'instructions d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Centurion D5-EVO REPAIR. Centurion D5-EVO REPAIR 14 pages. Sliding gate operator
Également pour Centurion D5-EVO REPAIR : Manuel de configuration (13 pages), Manuel de programmation (4 pages)
Imprimer la page
Legend
1. 220V AC mains cable via double pole mains isolator switch
(3 core LNE 1.5mm SWA)
Optional wiring (all cable is multi-stranded):
2. Intercom cable from motor to dwelling
3. Intercom cable from motor to entry panel
4. Safe CLS: Recommended infrared safety beams
5. TRG:
6. PED:
7. TRG:
8. LIGHT:
n1 = number of cores required by intercom
n2 = number of cores required by intercom
Possibly increase cable thickness if pillar lights are installed
Type of cable must adhere to municipal bylaws but typically SWA
(steel wire armoured) cable is recommended. The armouring
provides excellent screening, which gives better protection against
lightning – earth one end of the screening)
Allows for all features such as pedestrian opening, status LED, etc.,
to be operated from the intercom handset inside the dwelling.
Number of cores and type of cable could vary depending on brand
of access control system being used
For optimum range, an external receiver can be mounted on the
wall
2
Access control device
Optional pedestrian keyswitch (a)
OR keypad (b)
Optional external radio receiver
Optional pillar lights
power requirements)
(n1 + 6 core 0 .5mm )
(3 core 0.5mm )
2
(3 core 0.5mm )
(3 core LNE SWA, size according to
2
2
(n2 0.5mm )
(3 core 0.5mm )
2
(3 core 0.5mm )
2
2