Major tech MT760 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Major tech MT760. Major tech MT760 16 pages. 100a ac/dc trms mini clamp meter
Également pour Major tech MT760 : Manuel (4 pages)

Imprimer la page
Major tech MT760 Manuel d'instruction

1. Overview

The MT760 is a 2000 count True RMS 100A AC/DC mini digital clamp
meter with a resolution of 1mA. The meter measures 600V AC/DC,
capacitance, resistance measurements, plus a continuity buzzer and diode
test function. The VFC function allows the user to measure stable voltage
in high frequency applications of Variable Frequency Drives. Added
features include Zero/Relative mode for Capacitance Zero, resistance,
DCV, ACV, DCA and ACA offset adjustment and Non-Contact voltage
detection. Housed in a modern double moulded rubber housing.

2. Open case inspection

Open the package and take out the instrument. Please check
whether the following accessories are missing or damaged. If any
item is missing or damaged, please contact your supplier immediately.
1. Instruction manual - 1 copy
2. 1.5V AAA battery - 2 pieces
3. Probe assemblies - 1 pair

3. Safety precautions

This Meter complies with EN 61010-1,61010-2-032,61010-2-033,
Pollution Degree 2, measurement category: (CAT II 600V, CAT III 300V)
and Double Insulation standards.
Conforms to UL STD. 61010-1, 61010-2-032, 61010-2-033 Certified
to CSA STD. C22.2 NO. 61010-1,IEC STD 61010-2-032, 6101 0-2-033
CAT II: Applicable to test and measuring circuits connected directly
to utilization points (socket outlets and similar points) of the low voltage
MAINS installation.
CAT Ill: Applicable to test and measuring circuits connected to the
distribution part of the building's low-voltage MAINS installation,
before use and follow all safety instructions.
1. Use the clamp meter by following operation instructions, otherwise
safety functions of the current clamp meter may fail to protect you.
2. Abide by national safety laws and regulations. When operating in
dangerous and live wire exposed environment, use personal
protection equipment to prevent accidents such as electric shock and
arc discharge.
3. Do not cross any position other than protective barrier of current
clamp meter.
4. Before each use, check whether current clamp meter housing or
output cable insulation cracks or damaged first, also check for poor
connected parts. Especially pay attention to insulating layer around
the clamping mouth.
4