JALEXANDER JAE0342-T20 Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} JALEXANDER JAE0342-T20. JALEXANDER JAE0342-T20 4 pages.

Imprimer la page

MODEL #: JAE0342

JAE0342 -T20 (LED bulb included)

FLOOR LAMP

IMPORTANT SAFETY INSTRUCTIONS

Read and Save:

1. To reduce the risk of electric shock, this lamp has a

polarized plug (one blade is wider than the other ).

The plug will fit in a polarized outlet only one way. If the

plug does not fit fully into the outlet, reverse the plug.

If plug still does not fit, contact a qualified electrician.

Never use an extension cord unless the plug can be

fully inserted. Do not alter the plug.

2. Do not install non-factory wiring or any other electrical

components. Altering or modifying the lamp in any way

will

render the product unsafe.

3. Avoid laying objects directly over the power supply cord

to avoid cutting or damaging the wire.

4. Keep curtains, shades, wall hangings and all other fabrics

and objects away from the lamp shade, light switch and

the light bulb. Lamps are not designed to support

additional weight. Do not hang any objects from the

lamp or any lamp part.

5. Place the lamp on a stable, level surface in an area

where the lamp will not be tipped over or bumped.

This lamp is approved for indoor use only.

BULB REPLACEMENT

Use one 150 Watt maximum, Type A, 3-Way bulb or LED

equivalent bulb.

DO NOT EXCEED RECOMMENDED BULB WATTAGE.

1. Turn off and unplug the lamp and allow bulb to cool

before replacing bulb.

2. Light bulb should never touch the lamp shade.

CLEANING AND MAINTENANCE

1. To clean: use a soft, dry cloth only.

2. Do not use chemical or abrasive cleaning solutions.

The studs on

the upper ball

should be

aligned to this

position with

the bottom ball.

ASSEMBLY INSTRUCTIONS

Place

additional cord from the base (A).

2. Insert and thread the tube (B) into the base (A) by turning

clockwise until secure. Insert the ball (F) and metal ring (G)

onto the tube (B).

Note: Align the slots on the bottom ball with the studs on

the upper ball.

3. Repeat step 2 to install tube (C), tube (D) and tube (E).

4. Insert and thread the socket assembly (H) into the

tube (E) by turning clockwise until secure.

5. Install the light bulb into the socket assembly (H).

Pinch and insert the harp (I) into the harp fittings on

the socket assembly (H). Slide the caps on the harp (I)

over the fittings on the socket assembly (H) to secure.

7. Remove the finial (K) from the harp (I).

8. Place the shade (J) on the harp (I) and secure with

the finial (K).

Insert the plug into an electrical outlet.

10. Use the rotary switch on the socket assembly (H) to

adjust the light from low, medium, high, and off intensity.

For Customer Assistance:

www.jalexanderhome.com

Made in China

the base (A) on a flat surface, gently pull