Major tech MTC50 Manuel d'instruction - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Major tech MTC50. Major tech MTC50 14 pages. 2-in-1 lan tester & multimeter
Imprimer la page2.
As Coaxial cable has only two wires, we suggest you read the
result of the LED scan using Manual mode.
Remote Test
1.
Plug one end of the tested cable to the transmitting
RJ45 jack on the master unit marked with a ' ' and plug
the other end into the remote terminator. If the tested
cable is installed in a patch panel or wall plate, you may
use the included patch cable to solve the connector
gender problem.
2.
Now, set the Auto/Manual switch to Auto mode for
one-person testing.
3.
Read the test results from the LED display on remote
terminator.
Note:
The LED display on the remote unit will scan in sequence
corresponding to the transmitting end of the master unit.
Sample Test Results
1 2 3 4 5 6 7 8 G
1.
Continuity: Pin 2 has continuity
1 2 3 4 5 6 7 8 G
2.
Open: Pin 2 is opened
1 2 3 4 5 6 7 8 G
3.
Short: Pin 2 and Pin 3 are shorted
1 2 3 4 5 6 7 8 G
4.
Miswire: Pin 3 and Pin 6 are miswired
Caution:
1.
Operating the tester in live circuits may damage the
tester
2.
Leaving the battery in the tester for long periods of time
without use could drain power from the battery
13