Jalousie-Welt Jupiter Fonctionnement et entretien, instructions d'expédition, de déballage et d'installation - Page 18
Parcourez en ligne ou téléchargez le pdf Fonctionnement et entretien, instructions d'expédition, de déballage et d'installation pour {nom_de_la_catégorie} Jalousie-Welt Jupiter. Jalousie-Welt Jupiter 20 pages. Terrace awning
Imprimer la page3.9.1. Replacement a drive
In order to make a repair to a defective drive, the awning must be using a belt secured. All the necessary
work can be made only by a specialist. The drive must be the same series and by the same manufacturer
are.
3.9.2. Replacement of the sheathing
For this action must be the awning removed. The change must be made by an authorized dealer or the
awning must be sent to the manufacturer to replace the sheathing.
3.9.3. Replacement of the components
The change must be made by an authorized dealer or the awning will be sent to the manufacturer to replace
the item.
3.10.
Start-up
Any person can't stay in the area of the awning during the test run. All items located under the awning must
be removed. The remote control can be used only if the user see the awning in the whole range of its
movement. All equipment should be stored out of reach of the children.
In the awning were used special arms they change the pitch angle by rolling.
This made a compact device.
The pitch angle of the awning is the angle between the plane of the sheathing for maximum unrolled awning
and the horizontal plane. Decreasing of the pitch angle when awning will be unrolled, is natural.
3.11.
The scope of the wind sensors
In strong gust of wind or the incorrect setting of automatics can cause damage and for this the manufacturer
is not liable.
page: 18 / 20