aguti S2 Manuel d'instructions de montage - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} aguti S2. aguti S2 8 pages. Sleeping bench
Imprimer la page
Important instructions
Please read these instructions
carefully before you start
repairing the seat!
If the following instructions are not
observed, Aguti accepts no liability
or warranty. Failure to follow these inst-
ructions can result in serious injury.
INSTALLATIONS
Installation and repairs may be carried
out by qualified persons only
The seat/bench may only be installed
in a stationary vehicle. The handbrake
must be applied.
Please note the specifications of the
vehicle manufacturer when installing
and connecting the seat/bench.
Do not use damaged or defective
seats/benches.
Defective components have to be
repaired or replaced immediately.
The seat/bench must be completely
replaced after an accident.
The seat/bench shall not be
modified.
Use only original spare parts.
Regularly check all fastenings and
locks on the seat
Broken welded parts must not be
welded.
Hoses, electrical cables etc. must
not be kinked.
© aguti.com
| Stand: 5/05/2022
When replacing components that are
in the force flow of the belt anchorage
points, for safety reasons it must be
ensured that they are correctly posi-
tioned and that the tightening torques
of the fastening screws are observed.
Old fastening materials must not be
used.
Please test functions after every
repair. When repairing pneumatics,
the line system must be checked for
leaks.
Make sure that all adjustment mecha-
nisms audibly click into place. Opera-
te the levers over the entire actuation
path to avoid wear.
CARE / USAGE
Please do not use strong cleaning
agents to clean the seat. Use a slight-
ly damp cloth. The cover must not be
dampened.
Seats are designed for a maximum
of 150 kg. Benches for a maximum of
250 kg.
Make sure that the seat is not blocked
by objects in the vehicle. This can
damage the seat/bench.
Never reach into the adjustment me-
chanisms while using the seat/bench.
There is a risk of crushing hands and
fingers.
Always wear your seat belt while
driving.
Adjust the seat/bench correctly.
Ensure contact with the pedals even
on poor road surfaces.
Do not operate several control
elements at the same time.
INSTRUCTION MANUAL
1.
The illustrations in these instructions
generally show the left seat. The repair is
carried out in the same way for right-
hand seats.
2.
Installation and removal can be carried
out in reverse order.
3.
Not all fastening parts (cable ties)
are mentioned in the descriptions. After
each repair, hoses and cables should be
checked for their routing, mounting and
securing at the factory and corrected if
necessary.
2 / 8