ENGLISH
Energy consumption
Energy Consumption with a standard
load and bottom heating
Energy Consumption with a standard
load forced air oven
1) Information on the electrical connection, voltage and overall power is given on the rating plate (refer to
"Product description").
Installation
Caution! Refer to the assembly
instructions for the installation.
Warning! Only a qualified and
competent person must do the installation
of the appliance. If you do not contact qualified
or competent person, the guarantee becomes
invalid if there is damage.
• Before you built in the appliance to the kitch-
en cabinet make sure that the recess dimen-
sions are suitable.
• Make sure that there is anti-shock protection
for the installation.
• According to the regulations of force, all
parts which ensure the anti-shock protection
must be fixed in such a way that they cannot
be undone without tools.
Electrical connection
Warning! Only a qualified electrician
and competent person must do the
electrical installation.
• The manufacturer is not responsible if you
do not follow these safety precautions.
• Ground the appliance according to safety
precautions.
• Make sure that the rated voltage and type
of power on the rating plate agree with the
voltage and the power of the local power
supply.
• This appliance is supplied with a mains ca-
ble without plug.
• Any electrical component must be installed
or replaced by the After Sales Service tech-
nician or qualified service personnel.
• Always use a correctly installed shockproof
socket.
0,78 kWh
0,79 kWh
0,78 kWh
• The appliance can be placed with its back
and one side close to the higher appliances
or walls. The other side must be placed close
to the furniture with the same height.
• The built-in unit must meet the stability re-
quirements of DIN 68930.
• Built-in ovens and built-in cooking surfaces
are fitted with special connection systems.
For safety reasons, you must only combine
appliances from the same manufacturer.
• Do not use multi-way plugs, connectors and
extension cables. There is a risk of fire.
• Make sure that the mains plug is accessible
after installation.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
• Connect the appliance to the mains using a
device that allows to disconnect the appli-
ance from the mains at all poles with a con-
tact opening width of at least 3 mm, eg. au-
tomatic line protecting cut-out, earth leak-
age trips or fuse.
This appliance complies with the E.E.C. Direc-
tives.
14
Imprimer la page