Deco Lighting Large Gladetino Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Deco Lighting Large Gladetino. Deco Lighting Large Gladetino 4 pages. Mounting options

Imprimer la page

Large

Gladetino

Mounting Options

Before starting the installation and servicing, disconnect the power by turning off the circuit breaker. Turning the power off by using the light switch is not

sufficient to prevent electrical shock. All work should be done by a qualified electrician. This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and operation of the product and the hazards involved.

Pole Mount Arm (Mast Arm):

1. Align the Pole Mount Arm mounting holes with the (4) mounting holes on the rear side of the luminaire housing. (Fig. 1)

Fig. 1

2. Place the Pole Mount Arm against the housing, and route the Line, Neutral, and Ground wires through the small hole in the arm.

3. Fasten the arm to the housing using (4) included 1/4-20 bolts and the appropriate washers.(Fig. 2)

4. Loosen the (2) retaining bolts on the top of the arm so that the pole will not interfere with the bolts.

5. Connect the Line, Neutral, and Ground wires from the pole to the luminaire using the appropriate connectors.

6. Slide the pole completely into the arm and ensure that the luminaire is horizontal with the ground.

7. Tighten the (2) retaining bolts to fasten the luminaire to the pole. (Fig. 3)

Fig. 3

Deco Lighting practices a program of continuous product improvement, and as a result product specifications change frequently. We reserve the right to change

product specifications without notice. Contact Deco for the latest product information.

SAFETY PRECAUTION

Designed for 2-3/8" OD Pole

2917 Vail Ave., Commerce, CA 90040 • (800)613-DECO (3326) • [email protected] www.getdeco.com

Fig. 2

Dimensional Drawings