Jam B8 Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Jam B8. Jam B8 7 pages.

1-4 System Connection – bi-amp configuration with 4 core cable

Amplifiers are pre-wired with the output for channel B on pin2+/- of channel A output, and also the output from channel D to pin2+/-

of channel C output. This is to allow bi-amp configuration without the need of a separate patch panel. Four core speaker cable

must be used, and the LF signal applied to input A, and the HF signal applied to input B. LF output will be on pin1+/- and should be

connected to the woofer inside the speaker. HF output will be on pin2+/- and should be connected to the tweeter inside the

speaker. The B8 speaker is specifically configured for this application, Channels A and C are high power channels, and channels B

and D are medium power, as typically the high frequencies require less power than the low frequencies. Output connectors B and

D are unused (NC = no connection)