Century 4-in-1 TravelSolutions Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Century 4-in-1 TravelSolutions. Century 4-in-1 TravelSolutions 16 pages. Car seat/ stroller
Également pour Century 4-in-1 TravelSolutions : Manuel d'instruction (15 pages)

Imprimer la page

With stroller laying face down

on floor, slide Brake Housing

onto rear leg until it clicks in

place.

NOTE: Brake levers must face

rear of stroller.

Repeat for opposite leg.

While holding Axle Sleeve

between Brake Housings, slide

Axle through Brake Housing,

Axle Sleeve and opposite Brake

Housing.

Secure Wheel to Axle:

• Slide Wheel onto Axle with Ribs facing in.

• Push Wheel Retainer onto end of Axle while supporting

opposite end of Axle (to keep Axle from sliding). Wheel

Retainer will snap into groove on end of Axle.

NOTE: Make sure large end of Wheel Retainer is towards

Wheel.

• Snap Retainer Cap over Wheel Retainer.

• Line up Hub Cap tabs with slots in Wheel and snap Hub

Cap in place.

Repeat for opposite wheel.

Hub

Cap

Wheel

Retainer

Cap

CAUTION:

• Failure to install retainer cap may cause wheels to come

off of stroller.

• After wheel assembly is complete, pull on wheels to check

that they are secure.

ASSEMBLY continued

Housing

Axle

Sleeve

Ribs

Axle

Brake

Housing

Wheel

Attaching Cup Holder

Brake

WARNING

• To avoid burns, never put hot liquids in cup

holder.

• Avoid possible tipping. DO NOT place more

than 3 lbs. (1.4 kg) in cup holder.

Rotate both Locking Levers to

open position as shown.

Snap one end of cup holder

over stroller frame above

handle locks, rotate down to

opposite side and snap in

place.

Rotate both Locking Levers

over handle tubes to secure

cup holder to handle.

Axle

Sleeve

Locking Levers